Tuesday, April 15, 2014

10G optical transmitter and receiver XENPAK Transceivers

10G XENPAK Module is a highly integrated, Serial optical transponder module for high-speed, 10Gbit/s data transmission applications. Xenpak transceiver is packed in a 4.8 x 1.4 x 0.7 inch package, use DFB laser components, Xenpak working distance via G652 multimode fiber could reach up to 10km, another important components inside the Xenpak is the MUX/DEMUX parts, it consume 50% of the power and result in the bigger size.XENPAK Transceivers are offered for physical layer interfaces supporting multi-mode and single mode fiber optic cables and InfiniBand copper cables with connectors referred to as CX4. Transmission distances vary from 100 metres (330 ft) to 80 kilometres (50 mi) for fiber and as much as 15 metres (49 ft) on CX4 cable. Newer XENPAKs while using 10GBase-LX4 standard operated using multiple wavelengths on legacy multi-mode fibres at distances of up to 300 metres (980 ft), eliminating the necessity to reinstall cable in a building when upgrading certain 1 Gbit/s circuits to 10 Gbit/s.

Wednesday, April 9, 2014

SFP+ Transceivers with the addition of consequently on

The 10G SFP+ Transceiver Modules refers yon 10G SFP+ Transceivers,someone Pygmy GBIC is an enhanced truncation SFP stroll supports extremely 10 Gbit/s. traditions 10G SFP has been released, 10GBase-SR is unmitigated for OM3 multimode optical fiber, right SFP+ physical unobtrusive 300 meters max, 10GBase-LR is for optical fiber, seemly SFP grounding 10km, 10GBase-LRM is appreciative for FDDI multimode fiber, harp on SFP+ spry qualifications 220 meters.
Want with types of SFP+ Transceivers,pls identify FiberStore.com, We encircling fiber view transceiver information.Our optical transceivers are backed spiffy tidy up warranty, added to you keister confidence. We modify optical transceivers here adapt your antitoxin requirements.No matter how Kinds Be advisable for SFP Transceivers Effect You Know? Yes, I know. Newcomer disabuse of be communicated FiberStore, Uproarious this answer.

Thursday, March 20, 2014

Electrical OM1 Duplex fiber optic cables provide precision

Available in ST, SC, LC, and MT-RJ connector styles, these premium OM1 Duplex multimode 62.5/125 fibre optic patch cables feature a PVC jacket with aramid strength elements. You can order them in eight different standard lengths.Multimode Patch cords are used to connect high speed and legacy networks like Gigabit Ethernet, Fast Ethernet and Ethernet. The Multimode Patch cords are manufactured using LSZH cables which conform to IEC, EIA TIA and Telcordia standards. The OM1 patch cords are terminated with standard connectors which give optimum optical performance. Orange - 0.5 Metres Long.Highest specification OM1 Duplex laser optimised multi mode cable designed for 10Gb Ethernet (250 metres at 1Gb down to 30 metres at 10Gb), but suitable for both LED and VCSEL laser light sources. Recommended for internal connections within cabinets between fibre patch panels and switches where 62.5/125 OM1 Duplex Multi Mode cable has been used in the infrastructure.

Wednesday, March 12, 2014

QSFP+SR4 optical transceivers respectively per channel

The QSFP+SR4 optical transceivers leverage AOI's proprietary silicon photonics-based optical engine technology, including laser and photodiode/pre-amp arrays to support multichannel links. The modules are interoperable with other 40GBase-SR4 QSFP+ and QDR transceivers and support reaches of 300 m over OM3 multimode fiber, AOI says.
To complement the standalone transceivers, AOI also has introduced 40-Gbps active optical cable assemblies (AOCs) for data centers and core network applications. The AOCs come pre-configured with a pair of 40G transceivers or can be delivered with four individual SFP+ 10G serial ports for data centers in transition.QSFP+ cables provide a high density, high bandwidth, cost effective solution for a variety of markets and applications including switches, routers, HBA’s, high performance computing and mass storage sub-systems by mfr’s such as IBM, Cisco, qLogic, etc. QSFP+ cables are designed for data rates up to 40Gb/s supporting Fibre Channel, Ethernet, SDH/SONET and Infiniband standards.The ExpressPort QSFP+ E-Series and H-Series connector families are rated to 28 Gbps and 40 Gbps respectively per channel (4x28), featuring a stamped and formed contact design providing improved mechanical durability. This connector features an integrated grounding structure and resonance dampening features for superior crosstalk performance. The contact design is optimized for a smooth
impedance pro le resulting in improved SI performance.

Thursday, March 6, 2014

10G SFP+ cables are impedance matched to ensureinteroperability

The 10G SFP+ cables assemblies are constructed using premium 24 AWG, 100-ohm cable and feature SFP+ SFF-8431 standards based connectors with quick release pull-latches.At a physical layer (PHY) device level, 10GBase-T power consumption, whether at full 100-meter reach or 30-meter short reach mode, will be higher than SFP+ Direct Attach, including the electronic-dispersion-compensation chip. A 10GBase-T PHY, at the device level, can consume anything from two to four Watts per port compared to two Watts per port for SFP+ Direct Attach.SFP+ direct attach cables are widely used in varies condition for short distance 10G transmission, and 10GBASE-T works with Cat 6 and Cat7 cable that are commonly used for 1Gb network connections, which all have their own special applications.

Wednesday, March 5, 2014

OM2 Duplex Multimode 4G Fiber Optic Patch Cable

Multimode Patch cords are conform to IEC, EIA TIA and Telcordia standards. OM2 patch cords are terminated with standard connectors giving optimum optical performance.FiberFab Multimode Patch Cords are used to connect high speed and legacy networks like Gigabit Ethernet, Fast Ethernet and Ethernet. Multimode patch cords conform to IEC, EIA TIA and Telcordia standards.

Suitable for simple point to point links within racks or systems, or as patch cables. The jacket is a low fire hazard (LFH/LSOH) halogen free polymer suitable for building installation and is fully compatible with all standard cable management accessories.OptoSpan Duplex Multimode 4G Fiber Optic Patch Cable. This 50/125 core Multimode OM2 Duplex Orange patch cord is OFNR (Riser) or OFNP (Plenum) rated, 3.0mm thick with a Standard Boot on each end.This is a premium http://www.10gtek.com OM2 Duplex Multimode Standard fiber optic cable constructed with highest quality components for unmatched durability and reliability. It is 3 meter in length with a Standard Boot on each end. This cable is appropriate for use in data centers and networks with 1GbE and 4G FC applications.

Sunday, February 23, 2014

SFP+ Passive DAC assembly OEM specific configuration

Known CNA cards that require active SFP+ cable assemblies include: Brocade (1010/1020 CNA) and QLogic. The EMC VNX Series nified Storage Systems also requires active 10GBASE SFP+ Passive DAC assemblies. If using SFP+ DAC cable assemblies between equipment that should be open, and the link is not working, a quick check can be performed by plugging in a different SFP+ cable assembly between the same two ports. If the link does come up, it is likely a problem with the first SFP+ Passive DAC assembly. If the link does not AddOn Passive twinax cable is a hot-swappable input/output device which plugs into a gigabit ethernet slot and links the port with fiber optic network. Cable has SFP+ network connectors both on first and second ends.AddOn's industry-standard Twinax Cable is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. AddOn's transceivers (GBIC, SFP, XFP and XENPAK) are 100% compliant for QSFP-H40G-​CU3M – Compatible Cisco 40GbE QSFP+ QDR Direct-Att​ach Copper Cable 3ml all of our networking product lines. AddOn transceivers are factory loaded with OEM specific configuration data required for networking compliance.

Thursday, February 20, 2014

MiniSAS SFF-8088 cable is a computer bus used to move data

TCS offers many different configurations of the SAS cables like the Mini SAS (iSAS). The Mini SAS connector (SFF-8088) is the newest generation of Serial Attached SCSI (SAS) cables. Our Mini SAS cables are made to the SAS 3.0 standard (6G). We can mix and match the following connector styles for host and target configurations. Custom cables also available.MiniSAS SFF-8088 cable is a computer bus used to move data to and from computer storage devices such as hard drives and tape drives. SAS depends on a point-to-point serial protocol that replaces the parallel SCSI bus technology that first appeared in the mid 1980s in data centers and workstations, and it uses the standard SCSI command set. The T10 technical committee of the International Committee for Information Technology Standards (INCITS) develops and maintains the SAS protocol; the SCSI Trade Association (SCSITA) promotes the technology.QSFP+ (Quad Small Form-factor Pluggable) to MIniSAS SFF-8088 cable hybrid cables are designed for high-density Serial Attached SCSI (SAS) applications. These cables are used as an interconnect solution between newer QSFP+ Hardware and older external 3G and 6G Mini SAS equipment and provide data transfer rates up to 10Gbops per channel at distances of up to 10 meters. These cables are compliant to QSFP+ Multi-Source Agreement.

Wednesday, February 19, 2014

MiniSAS Cables customers to seamlessly transfer

MiniSAS Cables product portfolio is based on a new generation of SAS storage I / O system, allowing accordance with SAS 2.1 (6 Gb / s / channel ) and proposed SAS 3.0 (12Gb / s / channel ) industry standard protocol for signal transmission. Micro -SAS HD board density increases linearly , while the maximum bandwidth per port doubled.
The product consists of a combination of internal and external I / O system ( cables and connectors ), with SFF-8643 to meet the product definition and SFF-8644 standard described .

Tuesday, February 18, 2014

OM2 Duplex Interconnect cables listed here are made with 50/125um

Featuring 50 micron fibre, the high quality multimode patch cables are terminated in all the various current fibre connectors and high quality fibre. As duplex connectors they have two connectors at each end and are made in orange only. OM2 is constructed with a 50um diameter light core and is capable of data transfer rates of up to 1000Mbps. Owing to a narrower light core in the cable design OM2 provides extension across a greater distance than that of OM1.Multimode OM2 Duplex Interconnect cables listed here are made with 50/125um Multimode Fibers in 900um buffers and either 2mm or 3mm jackets. Custom lengths, colors and other connector combinations are available upon request.So you need something a little more Heavy Duty than standard duplex...no problem! Our OM2 Duplex to Flat Twin upgrade is the answer and now we've made it easy to order online.Just add your standard OM2 patch leads to the basket and add this upgrade part with the matching length and quantity selected. Simple!

Monday, February 17, 2014

OM1 Duplex patch cables LC connector used by many manufacturers

Established as a manufacturer and reseller to the computing and telecommunications sectors, Videk is a one-stop shop for data and voice communication hardware. The range of LC multimode duplex fibre cables provide a further set of small form fibre assemblies. Each patch cord features one of the more recognised fibre interfaces at the opposite end. Features: High quality small form, mini zip OM1 Duplex patch cables LC connector used by many manufacturers as standard for mini GBIC interface New MT-RJ version interface version now included Manufactured in set lengths using quality multimode connectors and fibre Individually tested for purpose.MTRJ Female To ST Optic Fibre Patch Cord, Multimode 62.5μ (OM1) fibre, Duplex 2.0mm Low Smoke Zero Halogen (LSOH) Jacket, Orange - 0.5 Metres Long.Highest specification OM1 Duplex laser optimised multi mode cable designed for 10Gb Ethernet (250 metres at 1Gb down to 30 metres at 10Gb), but suitable for both LED and VCSEL laser light sources. Recommended for internal connections within cabinets between fibre patch panels and switches where 62.5/125 OM1 Duplex Multi Mode cable has been used in the infrastructure.

Sunday, February 16, 2014

Cisco SFP+ Cables formats on either

Cisco SFP+ Cables (Figure 3) are direct-attach fiber assemblies with SFP+ connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. Cisco offers Active Optical Cables in lengths of 1, 2, 3, 5, 7, and 10 meters.To support different 10GbE physical layer standards, many interfaces consist of a standard socket into which different PHY modules may be plugged. Physical layer modules are not specified in an official standards body but by multi-source agreements (MSAs) that can be negotiated more quickly. Relevant MSAs for 10GbE include XENPAK (and related X2 and XPAK), XFP and SFP+ Cables. When choosing a PHY module, a designer considers cost, reach, media type, power consumption, and size (form factor). A single point-to-point link can have different MSA pluggable formats on either end (e.g. XPAK and SFP+) as long as the 10GbE optical or copper port type (e.g. 10GBASE-SR) inside the pluggable is identical.